Zephyr CCAE36ASX Manual

1. Select preferred duct location (internal blower -

vertical or horizontal, external blower - vertical 
only).

 %HJLQLQVWDOODWLRQE\UHPRYLQJWKHEDIÀH¿OWHUV

 5HLQIRUFHFDELQHWZLWK´[´ZRRGVWULSVLI

additional strengthening is required. Must be 
placed inside frameless cabinets.

4. Temporarily position the range hood in the 

desired mounting location. Measure and 
mark the mounting holes, duct and electrical 
locations with a pencil. 
NOTE:

,IXVLQJDQLQWHUQDOEORZHUD´URXQG

duct  opening is necessary. If using an external 
EORZHUDQ´URXQGRSHQLQJLVQHFHVVDU\

5. Drill/cut out the required openings for duct and 

electrical access; make sure the duct opening 
is large enough to apply duct tape.
NOTE: If installing an external blower, cut out a 
PLQLPXP´RSHQLQJIRUWKHH[WHUQDOEORZHU
wires to pass through. Refer to page 8 for 
VSHFL¿FDWLRQV

6. Fasten hood onto cabinet with screws provided.

7. Install electrical.

8. Install duct work and duct tape.

 5HLQVWDOOEDIÀH¿OWHUV

10. Power up hood and check for leaks around duct 

tape.

duct/silver
tape

5. Duct

opening
cutout

3. Add 1x2

wood strips

2. Baffle

filters