Samsung RF220NCTABC Uso Y Cuidado

setting up 

01 

SETTING UP

FLOORING

For proper installation, you must place this 

refrigerator on a level, hard surface that is the 

same height as the rest of the fl oor. This surface 

should be strong enough to support a fully loaded 

refrigerator, or approximately 286.6 lbs (130 kg). 
To protect the fi nish of the fl ooring, cut a large 

section of the cardboard carton and place it under 

the refrigerator where you are working. When 

moving the refrigerator, you need to pull and push 

it straight forwards or back. Do not wiggle it from 

side to side.

ACCESSORIES AND REQUIRED 
TOOLS

The following accessories are included with your 

refrigerator:

Hex wrench

Required Tools (Not provided)

You need the following tools to complete the 

installation of your refrigerator:

Philips 

screwdriver(+)

Flat-blade screw 

driver(-)

Socket wrench 

(10 mm)

Pliers

Allen wrench 

(3/16”) (5 mm)

REMOVING THE REFRIGERATOR 
DOORS

Before removing the door/drawer, make sure you 

read the following items:

Disconnect power to the refrigerator before 

removing the door or drawer.

•  Be careful not to drop, damage or 

scratch the door/drawer while removing 

them.

Be careful not to get injured while removing the 

• 

door/drawer.
Reattach the door/drawer properly to avoid: 

• 

Moisture from air leakage.

  -

Uneven door alignment.

  -

Wasting energy due to improper door seal.

  -

Disassembling the fridge door

Be careful not to drop and scratch the 

doors while removing the doors.

Remove the 3 screws holding down the top 

table and remove it.

Disconnect electric wire on the top of the 

refrigerator.

Top Table

DA68-02657A.indb   11

2012.7.3   10:53:27 AM