Frigidaire FGRU19F6QF Guia De Especificaciones

Descargar
Página de 4
Specifications  
subject to change.
USA
 • 
10200 David Taylor Drive
 • 
Charlotte, NC 28262
 • 
1-800-FRIGIDAIRE
 • 
frigidaire.com 
CANADA
 • 
5855 Terry Fox Way
 • 
Mississauga, ON L5V 3E4
 • 
1-800-265-8352
 • 
frigidaire.ca
FGRU19F6QF    
18.6 Cu. Ft.
All Refrigerator
All Refrigerator (18.6 Cu. Ft.) 
with no water filter
   
Professional
         Leveling System
(2) per unit raises height 2-9/16" min.  
Only available with trim kits.
 *Minimum depth from face of cabinet side panels 
and requires recessed electrical outlet.
Built-In Installation 
(without Trim Kit)
Single Unit
(A) 72" (B) 33" (C) 25
1
/
4
" min.*
Double Unit (Side-by-Side)
(A) 72" (B) 66" (C) 25
1
/
4
" min.*
Built-In Installation 
(with Trim Kit & Leveling System)
Single Unit
(A) 75" or 79" (B) 33" (C) 25
1
/
4
" min.*
Double Unit (Side-by-Side)
(A) 75" or 79" (B) 66" (C) 25
1
/
4
" min.*
All-
Refrigerator 
Cutout 
Dimensions
Allow at 
least 57 
1
/
4
" with door in 
90° open position
71 
3
/
8
"
24 
1
/
4
"
 29" to handle 
extension
Power 
cord
location 
(right 
bottom 
rear)
 70 
5
/
8
"
26
 1
/
2
"
32"
Recessed electrical outlet
 25" 
Countertop
 24" 
Cabinet
25 
1
/
4
" min. side panels, 
1
/
2
" min. width
(Trim Kit installation requires 
3
/
4
" min. width)
Optional Trim Kits
& Dimensions
Kits include top and side trim 
pieces, louvered grille, reversible 
kickplate and leveling system to 
fit 75" or 79" opening height.
Single  Louvered Trim Kit 
PN # TRIMKITEZ1
(D) 75
1
/
8
" or 79
1
/
8
" (E) 34 
3
/
4
"
Double  Louvered Trim Kit 
PN # TRIMKITEZ2
(Includes hardware to secure 
side-by-side units together.)
(D) 75
1
/
8
" or 79
1
/
8
" (E) 67 
1
/
8
"
Note: Both kits attach 
directly to cabinetry through 
top trim piece or louvered 
grille to stabilize unit(s).  
Refer to detailed kit installation 
instructions packed with 
kit or on web.
Louvered Grille 
(for 79" opening)
(Single Trim Kit shown.)
B
C
A
Cut off 
4" for 75" 
opening
Top Trim Piece 
(for 75" opening)
Trim Kit
E
D
4"
Reversible Kickplate
“Built-In Look” Specifications
• 
Minimum opening of 72" H x 33" W x 25-1/4" D required for single-
unit “Built-In Look” installation; 66" W required for double-unit 
installation. (72" H to be measured from finished floor to underside  
of soffit or overhead cabinet.)
• 
Remove all wall / floor molding prior to built-in installation.
Optional Trim Kit Specifications
• 
If optional Single or Double Louvered Trim Kit is to be used, different 
cutout dimensions are required. Kit can be adapted to fit either 75" 
or 79" opening height. (Refer to cutout dimensions on this page and 
detailed Louvered Trim Kit installation instructions included with kit  
or on web.)
• 
Remove all wall / floor molding prior to built-in installation.
Note:  For planning purposes only. Refer to Product Installation Guide  
on the web at frigidaire.com for detailed instructions.
Optional Accessories
• 
Single Louvered Trim Kit – (PN # TRIMKITEZ1).
• 
Double Louvered Trim Kit – (PN # TRIMKITEZ2).
Built-In All-Refrigerator Specifications
• 
Product Shipping Weight – 240 Lbs.
• 
An electrical supply with grounded three-prong receptacle is required. 
The power supply circuit must be installed in accordance with current 
edition of National Electrical Code (NFPA 70) and local codes & 
ordinances.
• 
Voltage Rating – 115V / 60 Hz / 20 Amps
• 
Connected Load (kW Rating) @ 115 Volts = 0.55 kW
• 
Amps @ 115 Volts = 5 Amps
• 
Always consult local and national electric codes.
• 
Minimum 25-1/4" depth requires recessed electrical outlet.
• 
To allow for ease of installation, tape excess power cord to back of unit.
• 
When installing refrigerator adjacent to wall, cabinet or other appliance 
that extends beyond front edge of unit, 20" minimum clearance 
recommended to allow for optimum 140° door swing, providing 
complete drawer / crisper access and removal. (Absolute 4" minimum 
clearance will ONLY allow for 90° door swing which will provide limited 
drawer / crisper access with restricted removal.)
• 
Refrigerator must be placed on level surface of hard material, same 
height as flooring. Surface must support approximately 800 lbs. when 
fully loaded. Unit equipped with 4-point leveling.
FGRU19F6Q 09/14 
© 2014 Electrolux Home Products, Inc.