Marvel ML24RDP2NP Manual De Usuario
15
OVERLAY DRAWER PANEL INSTALLATION
Step 4: Reinstall the Drawers
1. Fully extend drawer slides and place drawer on slides.
Be sure that drawer sits evenly on both slides and clips
slide into place in rear of drawer.
2. Re-install wire harness at rear corner of top drawer.
3. Re-install two screws through drawer into slides.
Figure 15
Overlay panel
flush with top
edge of drawer
Using clearance holes in
gasket channel mark
hole locations onto panel
Screw clearance
hole through
gasket extrusion
Figure 15a
Custom overlay
panel to be cen-
tered on width of
drawer.