Dacor DR30GFSLPH Manual

15

Care and Cleaning

Use care while cleaning the igniters. The porcelain is 

fragile and can crack or break.

IMPORTANT: The igniters will not work properly 

if the burner rings, burner bases or igniters are not 

clean. Dirty or wet igniters may not spark at all.
After disassembling the burners, check for any dirt 

or grime deposited on the individual parts, including 

the igniters.
1.  Using a firm toothbrush, clean completely 

around the metal top and porcelain base of each 

igniter. Use care while cleaning because the por-

celain is fragile and can crack or break. Do not 

use water to clean the igniters. If necessary, use 

a small amount of rubbing alcohol to help dis-

solve grime.

2.  Examine the burner rings. Remove anything 

stuck in the holes with a straightened paper 

clip, wire or needle. Be careful not to scratch or 

damage it. Do not distort the shape of the holes. 

3.  Clean all the burner rings, with window cleaner 

or rubbing alcohol. Use a cleaning brush with 

plastic bristles or a firm tooth brush. When done, 

rinse the parts well with clean water. Dry all the 

parts thoroughly before re-assembling them.

4.  Clean the burner caps with a solution of mild 

detergent and hot water.

5.  Reassemble the cooktop in the reverse order 

(see page 6 for detailed instructions). Make 

sure you line up the notches on the burner rings.

6.  Re-connect the power cord and test the burners 

after reassembling them. If the flame is uneven, 

be sure that all the burner parts are properly 

positioned, then check for any remaining dirt or 

grime on the burner parts or igniter. If erratic 

clicking is still present, make sure the igniter is 

completely dry. If the unit still exhibits problems 

after drying, call your local Dacor authorized 

service agent.

Outer burner cap

Burner cap

Inner burner cap

Burner ring

Burner ring

Burner base

Burner base

Igniter

Igniter

(left front burner only)

(right front, right rear, left rear burners)