Friedrich BR1224W3A Hoja De Datos

Descargar
Página de 8
Before getting started
Identify the locations where you will mount the indoor 
module and place the outdoor module.  Keep in mind, 
there is 25’ of connection line for connecting indoor and 
outdoor pieces, so locate them accordingly.  You cannot 
add additional length if they are too far apart.
Placing the indoor unit
It is recommended that you install the indoor module on 
an exterior wall within 6 feet of a properly rated outlet 
for the system you are installing. The BR1224W3A plugs 
into a 230V 15A outlet. The system should be plugged 
into a single circuit outlet only. Typically, hanging the 
indoor module above or adjacent to a window will 
provide a great location. NOTE: You should not drill 
through the window header (part of the rough framing) 
located directly above the window opening.
 
Placing the outdoor unit
The outdoor module should be placed on a level surface 
with adequate clearance from items like shrubbery, 
solid fencing or other air conditioning equipment that 
can impede airflow to the module. 
The outdoor module must be at least 12” from the wall 
for proper airflow.  The mounting pad provided with the 
system will raise the module off of the ground 3”. The 
fan should face away from the building.
25 ft. max.
6 ft. 
power 
cord
NOTE:
Be sure to place your 
equipment with these 
limitations in mind.
25 ft. 
connecting 
line
6 ft. power 
cord
DO NOT PLUG IN INDOOR UNIT until you have 
completed the entire installation process.
12
" minimum 
clearance
6" 
min
imu
cle
ara
nce
6" min.
6" min.
What’s in the carton?
1.  Breeze indoor module with 25 ft. connecting 
line attached
2.  Wall mounting template and bracket for in-
door module
3.  Breeze outdoor module
4.  Outdoor module connection covers
5.  Mounting pad for outdoor module
6.  Remote control
7.  Accessories (see list at right)
Tools you will need:
•  Phillips screwdriver 
•  1/2” wrench or crescent wrench
•  Drill with Phillips bit and 3/16” drill bit
•  Stud finder (recommended)
•  3” hole saw (through wall installations)
•  Safety glasses (recommended)
•  Trim knife
•  Level
1
.
2.
3.
4.
5.
7.
8.
11.
6.
9.
10.
14.
Accessories
ITEM  DESCRIPTION 
QTY
1. 
CONTROL BOX COVER DOOR 
1
2.  
CONTROL BOX COVER 
1
3.  
QUICK CONNECT COVER 
1
4.  
WIRE TIE 
2
5.  
CONNECTING LINE BENDING GUIDE 
1
6.  
ELECTRICAL CORD RETENTION BRACKET 
1
7.  
WALL OPENING FILL GASKET 
1
8.  
OUTDOOR UNIT ANCHOR SCREW 
4
9.  
OUTDOOR UNIT WASHER FOR ANCHOR SCREW  4
10.  
SCREW #8 X 3/4” TRUSS HEAD 
6
11 
SCREW #6 -19X.375 HEX HEAD 
1
12.  
WALL ANCHOR FOR #8 X 1 1/2” SCREW 
15
13.  
SCREW #8 X 1 1/2” PHILLIPS PAN HEAD 
15
14.  
CONNECTING LINE CLIPS 
5
12.
13.