Thermador WDC30J Instruccion De Instalación
Safety
Appliance Handling Safety
Hidden surfaces may have sharp edges. Use caution when
reaching behind or under appliance.
Hidden surfaces may have sharp edges. Use caution when
reaching behind or under appliance.
Safety Codes and Standards
This appliance complies with one or more of the following
Standards:
•
This appliance complies with one or more of the following
Standards:
•
UL 858, The Standard for the Safety of Household
Electric Ranges
Electric Ranges
•
UL 923, The Standard for the Safety of Microwave
Cooking Appliances, current edition
Cooking Appliances, current edition
•
UL 507, The Standard for the Safety of Electric Fans
•
UL 1026, Electric Household Cooking and Food
Service Appliances
Service Appliances
•
ANSI Z21.1, The American National Standard for
Household Cooking Gas Appliances
Household Cooking Gas Appliances
•
CSA C22.2 No. 64, Household Cooking and Liquid-
Heating Appliances
Heating Appliances
•
CSA C22.2 No. 113, Fans and Ventilators
•
CSA C22.2 No. 61, Household Cooking Ranges
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
determine if additional requirements and/or standards
apply to specific installations.
Electric Safety
Do not cut or remove the ground prong on the power cord.
It must be plugged into a matching grounding type
receptacle to avoid electrical shock. If there is any doubt as
to whether the wall receptacle is properly grounded, the
customer should have it checked by a qualified electrician.
Do not cut or remove the ground prong on the power cord.
It must be plugged into a matching grounding type
receptacle to avoid electrical shock. If there is any doubt as
to whether the wall receptacle is properly grounded, the
customer should have it checked by a qualified electrician.
Be sure your appliance is properly installed and grounded
by a qualified technician. Installation, electrical connections
and grounding must comply with all applicable codes.
by a qualified technician. Installation, electrical connections
and grounding must comply with all applicable codes.
If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a
separate branch circuit.
Electrical Code), this appliance must be installed on a
separate branch circuit.
Before installing, turn power OFF at the service panel. Lock
service panel to prevent power from being turned ON
accidentally.
service panel to prevent power from being turned ON
accidentally.
Refer to data label for more information. See “Data Rating
Label” on page 11 for Data Label location.
Label” on page 11 for Data Label location.
INSTALLER – Show the owner the location of the circuit
breaker. Mark it for easy reference.
breaker. Mark it for easy reference.
IMPORTANT – Save these instructions for the local
electrical inspector's use.
electrical inspector's use.
Related Equipment Safety
Remove all tape and packaging before using the appliance.
Remove all tape and packaging before using the appliance.
Never modify or alter the construction of the appliance. For
example, do not remove panels or wire covers.
example, do not remove panels or wire covers.
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
WARNING:
If the information in this manual is not followed exactly,
fire or shock may result causing property damage or
personal injury.
fire or shock may result causing property damage or
personal injury.
CAUTION:
For units with glass panels, use care when handling
glass to avoid breaking. Broken glass could cause injury.
glass to avoid breaking. Broken glass could cause injury.
WARNING:
Electrical Shock Hazard
•
•
Do not remove ground prong.
•
Do not use an adapter.
•
Do not use an extension cord.
•
Failure to follow these instructions can
result in death, fire, or electrical shock.
result in death, fire, or electrical shock.