Moen 6121ORB Guia De Especificaciones
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes hot and cold indicators
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes hot and cold indicators
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited
to 2.2 gpm max (8.3 L/min)
to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 Cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by to WaterSense,® ASME A112.18.1,
• 1224 Cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by to WaterSense,® ASME A112.18.1,
ICC A117.1 and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with
• Complies with California Proposition 65 and with
the Federal Safe Water Drinking Act
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
KINGSLEY™
Two Handle Lavatory Faucet
Models: 6121 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1” (25mm) MIN. DIA.
4-1/2"
(114mm)
6-3/4"
(171mm)
3-1/4"
(82mm)
4-3/8"
(111mm)
ESCTUCHION DIA.
6-7/16" x 2-17/32"
6-7/16" x 2-17/32"
(164mm) x (64mm)
3/4" (19mm)
MAX. DECK
THICKNESS
THICKNESS
4"
(102mm)
2-7/16"
(62mm)
MOUNTING
NUT/WASHER
HOT
1/2" NPT
COLD
1/2" NPT
LIFT ROD
Rev. 7/08