Maytag MVWB835DW Uso Y Cuidado

Turn cycle knob to choose your wash cycle. 

Once you select a cycle, select the wash temperature by 

touching the Temperature button to the desired setting.
NOTE: Always read and follow fabric care label instructions to 

avoid damage to your items. If not sure on which temperature to 

use, refer to the chart below or select a cooler temperature.

If you would like to add an Extra Rinse and/or Oxi option, touch 

the button for that feature.

Touch and hold START/PAUSE button for 3 seconds to start the 

wash cycle. When the cycle has finished, the end of cycle signal 

will sound (if set). Promptly remove items when cycle is done to 

avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, 

and snaps.

If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE button to pause washer; the lid will unlock 

once the washer movement has stopped. This may take several 

minutes if the load was spinning at a high speed. Then close lid 

and touch and hold START/PAUSE button again for 3 seconds to 

restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes the 

water will pump out and F8E6 error code will appear on the 

display.

Once you select a cycle, select the soil level by touching the 

Soil Level button to the desired setting.

Light soils

Colors that bleed 

or fade

Heavy Soils

Whites

Pastels

Moderate soils

Bright colors

 Even for cold wash settings, some warm water  

may be added to the washer to maintain a minimum temperature.