Samsung RF23J9011SG Manual De Usuario

English - 17

SETTING

INSTALLING THE WATER

DISPENSER LINE

A water dispenser with a filter is one of the helpful

features on your new refrigerator.

To help promote better health, the water filter

removes unwanted particles from your water.

However, it does not sterilize or destroy

microorganisms.

You may need to purchase a water purifying

system to do that.

The water line also connects to the ice maker.

For the ice maker to operate properly, water

pressure of 20 ~ 125 psi is required.

If the refrigerator is installed in an area with low

water pressure (below 20 psi), you can install a

booster pump to compensate for the low pressure.

After you have connected the water line, make

sure the water storage tank inside the refrigerator is

properly filled.

To do this, press the water dispenser lever until the

water runs from the water outlet.

• Water line installation kits are available at

extra cost from your dealer.

We recommend using a water line

installation kit that contains copper tubing

and a 6 mm (¼”) compression nut.

• Use the new hose-sets supplied with the

appliance only. Do not re-use an old hose set.

Connecting to the water supply line

1. First, shut off the main water

supply.

2. Locate the nearest cold water drinking line and

install the pipe clamp and shut off valve.

Pipe clamp

Cold water line

Shut off valve

3. Connect the water line installation kit to the shut

off valve.

Shut off valve

Pipe clamp

Cold water line

Water line installation

kit

Connecting the water supply line to the

refrigerator

There are several items that you need to purchase

to complete this connection.

You may find these items sold as a kit at your local

hardware store.

Using Copper Tubing

Using Plastic Tubing

• ¼” copper tubing

• ¼” compression nut (1pc)

• Ferrule (2pc)

• ¼” plastic tubing

→

Molded end (Bulb)

• ¼” compression nut (1pc)

Compression Nut

(1/4”) (Assembled)

Ferrule

(Not supplied)

Plastic Tubing

(Assembled)

Compression

Fitting

(Assembled)

Molded end

(Bulb)

Compression

nut (B) (1/4”)

(Not supplied)

Copper tubing

(Not supplied)

Plastic tubing (A)

(Not supplied)

Household water supply line

Refrigerator

DA68-03194D-01.indb 17

15. 1. 8. �� 11:06