Summit SCR312L Manual De Propietario

 

have it replaced by a qualified electrician with an outlet that meets 
the local codes. DO NOT USE AN EXTENSION CORD.  Required 
nominal voltage and frequency are indicated on the rating plate.  
The connection to the power supply and grounding  has to be 
made according to current standards and regulations. The 
appliance resists temporary voltage shifts with a tolerance from  
– 15% to +10%. 
 
Energy Saving Tips 

• 

The more airflow you can provide around an appliance, the less 
energy it will use. 

• 

Keep door open a minimum of time, and shut securely. 

 
LEVELING THE REFRIGERATOR 
 
1. Be sure the two front leveling legs are screwed into place on the 

bottom of the unit. The back of the unit rests on two fixed 
supports. 

2. Adjust the front legs just enough to lift the cabinet up off the 

floor. 

3. Place a leveling tool on top of the appliance, first side to side, 

then front to back. Turn leg counter-clockwise to raise a corner, 
and clockwise to lower a corner. 

4. Repeat Step 3 until appliance is level. 
5. After appliance is fully loaded, recheck with a level as in Step 3. 
 
 
 
 

 

 
The SCR312L beverage refrigerator should be placed where the 
ambient temperature is between 32°F and 90°F. If the ambient 
temperature is above or below this range, the performance of the 
unit may be affected. For example, extremely hot or cold 
conditions may cause the interior temperature to fluctuate. 

 

Other factors that may affect the inner temperature are whether 
the interior light is kept ON or OFF, and whether the bottles are 
located on the upper/middle or lower section.