Liebherr HWS1800 Manual
10
o
peraTIon
Setup Mode
In the setup mode you can activate the following
functions:
= Sabbath mode
= Display brightness
= Temperature display mode
= Child lock
= Display brightness
= Temperature display mode
= Child lock
How to activate the setup mode:
• Press the
Ventilation button for approximately
five seconds
- after 5 seconds will flash in the display.
The appliance is in the setup mode now.
You can select the setup mode functions by
The appliance is in the setup mode now.
You can select the setup mode functions by
pressing the
Up/Down buttons.
Note
In the setup mode the display will flash continu-
ously.
Exit setup mode:
• Press the
On/Off button. The appliance will
change back to normal operation.
=
Sabbath Mode
This feature considers the Religious requirements
on Sabbath or Holidays. When the Sabbath Mode
is active some functions of the electronic controls
are switched off.
The door can be opened and closed at any time.
The door can be opened and closed at any time.
• The lighting remains off.
• The cooling fan remains in its actual state: If it is
on it remains on, if it is off it remains off.
• There is no door alarm.
• There is no temperature alarm.
• The unit will return into Sabbath Mode after a
power failure.
How to activate the Sabbath Mode
• Activate the setup mode by pressing the
Ventilation button for 5 seconds
- the display shows .
• Press the
Ventilation button
- the display shows
• Press the
Ventilation button again
- the display shows
- the Sabbath mode is activated.
• Exit setup mode by pressing the
On/Off button.
How to deactivate the Sabbath Mode
• Activate the setup mode by pressing the
Ventilation button for 5 seconds
- the display shows .
• Press the
Ventilation button
- the display shows
• Press the
Ventilation button again
- the symbol
in the display disappears,
the Sabbath mode is deactivated.
• Exit setup mode by pressing the
On/Off button.