Summit SINC424220 Manual

 

 

14

If you encounter the following error messages while using your cooktop, 
check the guide below to see if you can correct the problem yourself before 
calling for assistance: 

 

There is no pan on 
the unit.  
 
Pan is not induction-
capable. 

Use an induction-
friendly pan (see 
PROPER & 
IMPROPER 
COOKWARE). 

The temperature of 
internal components 
is too high.  
 
There is a 
temperature testing 
circuit failure. 

Clear/unblock 
ventilation slots. Let 
the device cool off for 
a few minutes. If the 
error message 
remains on display 
after the device has 
cooled off, contact an 
authorized repairman.

The pan is empty. 
 
The temperature of 
the pan is too high. 
 
There is a 
temperature testing 
circuit failure. 

Check that the pan is 
not empty. 
 
Remove the 
cookware from the 
cooktop. Let the 
device cool off for a 
few minutes and try 
again. 

The voltage is 
unusual. 

Let the device cool off 
for a few minutes and 
try again. 

 

If your unit is still not functioning properly, call SUMMIT toll-free at 800-932-
4267 to speak with a representative.