Zephyr CPAE Manual
13
www.zephyronline.com
INTERNAL BLOWER INSTALLATION
•
Fit the blower inside the hood.
•
Install the blower to the support with 4 screws
(Provided), check that the rectangular outlet of the
blower matches with the rectangular slot of the
support.
Note: The 4 fixing screws must be screwed in from
the outside of the hood (See photo below).
(Provided), check that the rectangular outlet of the
blower matches with the rectangular slot of the
support.
Note: The 4 fixing screws must be screwed in from
the outside of the hood (See photo below).
•
Connect the blower to the range hood.
Inst
allation - Internal Blower