Franke PSX120339 Instruccion De Instalación

This sink is specifically designed to be undermounted in a solid surface countertop only.
CAUTION: Sink edge may be sharp; handle with caution. Do not install a damaged sink. Inspect carefully.

1. The size should be exact as this sink uses coordinating accessories which fit precisely in the cut out.

2. Determine placement of the clip brackets as indicated on the template. Pre-drill holes according to method desired based on

countertop material. 

NOTE: You the fabricator may elect to epoxy in the screw or use a brass anchor.

3. Apply a bead of silicone evenly along edge on the underside of countertop.

4. Position and align sink over the opening. Press sink into silicone seal.

5. After re-checking alignment, tighten clip brackets against the sink edge.

6. Remove excess silicone.  

HINT:   After silicone cures, wipe inside edge with denatured alcohol. This will smooth out any rough areas.

NOTE: The template included (or dxf file downloaded from website) is only a guide. The actual sink and accessories should ALWAYS

be present to ensure a perfect cut. FRANKE is not responsible for an improperly cut countertop or improper installation.

This sink is specifically designed to be undermounted in a solid surface countertop only.
CAUTION: Sink edge may be sharp; handle with caution. Do not install a damaged sink. Inspect carefully.

1. The size should be exact as this sink uses coordinating accessories which fit precisely in the cut out.

2. Determine placement of the clip brackets as indicated on the template. Pre-drill holes according to method desired based on

countertop material. 

NOTE: You the fabricator may elect to epoxy in the screw or use a brass anchor.

3. Apply a bead of silicone evenly along edge on the underside of countertop.

4. Position and align sink over the opening. Press sink into silicone seal.

5. After re-checking alignment, tighten clip brackets against the sink edge.

6. Remove excess silicone

HINT: After silicone cures, wipe inside edge with denatured alcohol. This will smooth out any rough areas.

NOTE: The template included (or .dxf file downloaded from website) is only a guide. The actual sink and accessories should ALWAYS

be present to ensure a perfect cut. FRANKE is not responsible for an improperly cut countertop or improper installation.

Countertop cut is top of bevel.

No recessed countertop. 

No countertop overhang.

Sink flush with countertop.

No recessed countertop. 

No countertop overhang.

0509

FSSI I0509

31219

226494_Franke_31219_FSSii0509_Installation_V2.qxd:226494_31219_Franke_infoBil.qxd  6/1/09  9:44 AM  Page 2