Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Gigabyte
  4. GA-MA790X-UD3P
  5. Manual De Usuario

Gigabyte GA-MA790X-UD3P Manual De Usuario

Descargar
Página de 112
- 43 -
BIOS Setup
2-4
Standard CMOS Features
Date
Sets the system date. The date format is week (read-only), month, date and  year. Select the
desired field and use the up arrow or down arrow key to set the date.
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow
or down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your IDE/SATA devices by using one of the two methods below:
•  Auto
Lets the BIOS automatically detect IDE/SATA devices during the POST.
(Default)
•  None
If no IDE/SATA devices are used, set this item to None so the system will
skip the detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA,
Large.
IDE Channel 2, 3, 4 Master/Slave
IDE Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
Extended IDE Drive Configure your IDE/SATA devices by using one of the two methods below:
•  Auto
Lets the BIOS automatically detect IDE/SATA devices during the POST.
(Default)
•  None
If no IDE/SATA devices are used, set this item to None so the system will
skip the detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), Large.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Mon
, Feb  2  2009
Time (hh:mm:ss)
18:25:04
 IDE Channel 0 Master
[None]
 IDE Channel 0 Slave
[None]
 IDE Channel 1 Master
[None]
 IDE Channel 1 Slave
[None]
 IDE Channel 2 Master
[None]
 IDE Channel 2 Slave
[None]
 IDE Channel 3 Master
[None]
 IDE Channel 3 Slave
[None]
 IDE Channel 4 Master
[None]
 IDE Channel 4 Slave
[None]
Drive A
[1.44M, 3.5"]
Floppy 3 Mode Support
[Disabled]
Halt On
[All, But Keyboard]
Base Memory
640K
Extended Memory
510M
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
       F5: Previous Values
F6: Fail-Safe Default
F7: Optimized Defaults
Item Help
Menu Level