Fisher & Paykel DD24DCTB7 Guía De Instalación Rápida

As the wash progresses, the display will count down the minutes remaining and show what stage the program is at (different
programs will go through different stages). When the program has finished, the display will show 

 and the dishwasher will

beep six times.

You may notice the following noises at the end of the wash. These are all part of normal operation:

  In double models, both drawers may be draining simultaneously.

  The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists 

with drying and uses negligible amounts of energy. 

For best drying results, we recommend unloading the dishes once they have cooled. 

You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable 
settings before you start using your dishwasher.

A neatly arranged load with evenly
spaced dishes helps wash performance.

Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.

Overcrowding reduces wash
performance.

Protruding items will stop the 
internal lid of the dishwasher from
sealing properly, which could result
in a service call. 

Ensure there is enough space between
plates.  Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.

If plates and cutlery are  nesting,
they are less likely to be cleaned
well.

Ensure that water reaches all items on
the adjustable racks.

Dishware is blocking water from
reaching items on the adjustable
racks.

Regulates the amount of 
rinse aid dispensed. Reduce 
this setting if there is excess 
foam after a wash. Increase 
this setting if dishes are wet 
or streaky after a wash.

Refer to 
the ‘Water 
softener’ 
section of 
the ‘User 
guide’ for
details.

Your dishwasher 
is factory-set to 
automatically 
power on for 30 
seconds whenever 
you open the 
drawer.
You can turn this 
setting off.

Your dishwasher 
is factory-set to 
beep six times 
at the end of a 
wash. 
You can turn this 
setting off.

When this setting is on,
the drawer will
automatically lock 30
seconds after it’s closed.
It can then be unlocked by 
pressing 

 (unless Keylock 

or Childlock is also activated). 
Useful in boats or motor 
homes.

When this setting is on, 

 will remain in the 

display after a wash to 
remind you that the dishes 
are clean. This is useful if 
you prefer storing clean 
dishes in your dishwasher, 
taking out only what you 
need. When the last clean 
dish has been removed, 
press 

 to return to 

normal operating mode. 

 

Check that there is no wash underway, press

, then open the drawer.

 

To enter the menu: press the 

 

selector on top first with one finger, then the

button on the front with another finger, hold both 

until one long beep sounds, then release.

You are now in the Rinse aid option of the preference options menu.

If you want to change the Rinse aid setting, go to step 3 now.

If you want to change the setting of another option, you will need to scroll to that option first.

To scroll to the next option: press

. To know which option you’re in, watch the letters in the display (see table below). 

 

When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).

 

Press

to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, 

 

you need to press

3 times.

 

Press

 . This will save the new setting and quit the preference options menu.

*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.

For detailed information on the
features of your dishwasher

For warranty information

If you…

  have any questions or comments
  need a Fisher & Paykel authorized 

technician to service your product

  need replacement parts or accessories
  want to register your product

590191A      10.11