Gaggenau BS471611 Manual De Propietario
16
Setting the date
The default date appears in the display. The day
setting is already active.
setting is already active.
1
Set the required day with the rotary selector.
2
Switch to the month setting with the
C
symbol.
3
Set the month with the rotary selector.
4
Switch to the year setting with the
C
symbol.
5
Set the year with the rotary selector.
6
Confirm with
™
.
Setting the temperature format
The two possible formats °C and °F appear in the
display. The °C format is selected by default.
display. The °C format is selected by default.
1
Set the required format with the rotary selector.
2
Confirm with
™
.
Setting the water filter
"Water filter” appears in the display. The default is
"Available".
"Available".
It is recommended to install the descaling system
GF 111 100 if the water hardness exceeds 7°dH
(carbonate hardness 5°dH).
GF 111 100 if the water hardness exceeds 7°dH
(carbonate hardness 5°dH).
1
Use the rotary selector to select "Available" (with
water filter) or "Not available" (without water
filter).
water filter) or "Not available" (without water
filter).
2
Confirm with
™
.
3
If water filter "Available" has been selected:
"Water filter capacity” is shown in the display.
"Water filter capacity” is shown in the display.
4
Turn the rotary selector to select the capacity of
the filter cartridge (between 100 - 9000 liters).
Refer to the instructions included with the filter
cartridge.
the filter cartridge (between 100 - 9000 liters).
Refer to the instructions included with the filter
cartridge.
5
Confirm with
™
.
Setting water hardness
"Water hardness" appears in the display.
1
Check the mains water with the included
carbonate hardness test: fill the small
measurement tube with mains water up to the 5 ml
mark.
carbonate hardness test: fill the small
measurement tube with mains water up to the 5 ml
mark.
2
Add drops of indicator solution until the color
changes from purple to yellow.
changes from purple to yellow.
Important:
count the drops and carefully swing
the measurement tube after every drop until the
liquids have mixed thoroughly. The number of
drops corresponds to the water hardness.
liquids have mixed thoroughly. The number of
drops corresponds to the water hardness.
3
Set the measured water hardness with the rotary
selector. The value 12 is set by default.
selector. The value 12 is set by default.
4
Confirm with
™
.
Completing initial set-up
"Initial set-up complete. Please calibrate the appliance
before first cooking" appears in the display.
before first cooking" appears in the display.
'DWH
7HPSHUDWXUHIRUPDW
:DWHUILOWHU
$YDLODEOH
:DWHUKDUGQHVV