Summit FS408BLBISSHH Manual De Propietario
4
Technical Information
Models:
FS407L
(white)
FS408BL
(black)
Capacity: 2.8 cubic feet
Electrical Input: 115V AC / 60Hz
Rated
Current:
1.6A
Power
Input:
90W
Refrigerant: R134a, 3.0 oz
Installation:
Free-standing
Unit Weight: 64 lbs
Unit Dimensions: 19.5"W x 21.5"D x 33.3"H
Installation Instructions
Before Using Your Freezer:
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
4 drawers
1 handle with screws and handle seal
2 keys
Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation.
Remove the drawers and clean them and the interior surfaces of the unit with
lukewarm water using a soft cloth.
lukewarm water using a soft cloth.
Installing the Freezer:
This appliance is designed to be free-standing only, and should not be
recessed or built in.
recessed or built in.
Place your unit on a floor that is strong enough to support the unit when it is
fully loaded. To level your unit, adjust the leveling legs at the bottom.
fully loaded. To level your unit, adjust the leveling legs at the bottom.
Allow 5 inches of space between the back and sides of the unit, which will
allow the proper air circulation to cool the compressor and condenser.
allow the proper air circulation to cool the compressor and condenser.
Locate the unit away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Extremely cold ambient temperatures
may also affect the unit's performance.
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Extremely cold ambient temperatures
may also affect the unit's performance.