Whirlpool WOD97ES0ES Guía Del Usuario

1.  Press PROOF for the desired oven.
2.  Press START for the selected oven.

Let the dough rise until nearly doubled in size. Proofing time may vary depending 

on dough type and quantity.

3.  Press CANCEL for the selected oven when finished proofing.
Refer to the “Proofing Bread” section for more information.

The Stop Time keypad is used to enter the stop time for an oven function. Stop Time should 

not be used for foods such as breads and cakes because they may not bake properly.
To set a Cook Time or a Stop Time, see the “Cook Time” section.

Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length 

of time, and/or shut off automatically.
To set a Cook Time or a Stop Time, see the “Cook Time” section.

See the “Self-Clean Cycle” section.

1.  Check that the ovens and timers are off.
2.  Press and hold START for 3 seconds.
3.  If enabled, a tone will sound, and “Control Locked” will be displayed.
4.  Repeat to unlock. No keypads will function with the controls locked.

Odors and smoke are normal when the oven is used the first few 

times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive 

to the fumes given off. Exposure to the fumes may result in 

death to certain birds. Always move birds to another closed 

and well-ventilated room.

The display will light up when first powered up or after a power 

loss. When oven is not in use, the time of day is displayed.

Tones are audible signals, indicating the following:
One Beep

 

■

Valid keypad press.

 

■

Function has been entered.

 

■

Oven is preheated.

 

■

Invalid keypad press.

 

■

End of cycle.

 

■

End of Timer.

Use the Settings/Clock keypad to change the tone settings.

Many features of the oven control can be adjusted to meet 

your personal needs. These changes are made using the  

Settings/Clock keypad.
Use the Settings/Clock keypad to scroll through the features 

that can be changed. Each press of the Settings/Clock keypad 

will advance the display to the next setting. You can also press 

SETTINGS/CLOCK, and then press the number keypad indicated 

in the following chart to go straight to the desired setting.

1

Clock

2

Temp

3

Sound (On/Off)

4

Sound (High/Low)

5

End Tone

6

Calibrate

7

Sabbath

8

Language

9

Demo Mode

After selecting the feature to be changed, the control will 

prompt you for the required input. Press the Settings number 

for the selected setting to adjust the setting. Details of all of 

the feature changes are explained in the following sections.
Press CANCEL to exit Settings.