Summit SWC530LBISTADAX Manual De Propietario

 

5

5.  Use the new bottom hinge provided in the plastic bag inside the wine cellar. 

6.  Place the door back onto the wine cellar, lining up the top hinge pin. 

7. Connect the new bottom hinge pieces to the door and cabinet, using the 

screws from the opposite side and following the same placement. 

8.  Keep the spare hinge, in case you ever want to set the door back to its original 

position. 

9.  Install the handle on the right side of the door. 

 

1. Remove the handle from inside the unit and unwrap it.    There should be two 

screws in the package. 

2. Place the handle in position on the door frame so that the holes in the handle 

are located over the matching holes in the door frame. 

3. Gently pull back the rubber door gasket on the reverse side of the door frame 

to expose the screw holes and insert a screw into each hole so that it engages 
the handle. 

4. Tighten each screw to secure the handle firmly.