Boss Audio BV7320 Manual De Usuario
4. Basic Disc, USB or MMC/SD Operation
4.1 Begin playback
1.
2. Press the RELEASE button to
3. Insert a disc into the DISC SLOT(Label surface up), then flip up the
front panel till hearing a clip.
?
Common Question
Q: There is nothing displayed on the monitor when the DVD player is
turned on. How to solve this problem?
A: Ensure that the monitor was set to right video input(not TV channel); for
example, if you make VIDEO1 INPUT of the monitor and DVD player
connected
with each other, then you need
connected
with each other, then you need
to VIDEO1.
Connect the video output of this unit to the video input of the external
monitor, and select the right video input on the menu of the external
monitor.
monitor, and select the right video input on the menu of the external
monitor.
to set the monitor input
Discs that are scratched, poorly manufactured or recorded in low quality,
may not play.
Remark:
1) In addition to normal CD and DVD, this unit supports to play CD-R,
CD-R/W, DVD-R and DVD-R/W as well; however, depending on the
conditions of the recording equipment, recording program or the disc
itself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.
conditions of the recording equipment, recording program or the disc
itself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.
2) When dealing with CD-R, CD-R/W, DVD-R or DVD-R/W recording,
too high speed recording may result in poor signal quality and therefore,
we recommend selecting the lowest recording speed as possible.
we recommend selecting the lowest recording speed as possible.
To connect an external monitor to this unit.
drop down the front panel.
! NOTE
1.
2. If the player cannot read disc under normal condition, please try to
eject and reload the disc again.
3.
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
5
When playing a DVD disc, press the SUBTITLE button repeatedly to select
the language of the caption or turn off the caption.(depend on the current
disc)
When playing a VCD/MP3/WMA/CD disc , the button is not available.
the language of the caption or turn off the caption.(depend on the current
disc)
When playing a VCD/MP3/WMA/CD disc , the button is not available.
5
1. When playing a DVD disc , press the AUDIO button repeatedly on the remote
control to select the desired language type. (depend on the current disc)
2. When playing a VCD disc, press the AUDIO button repeatedly to select the
sound mode of the MONO L, MONO R, MIX MONO and Stereo, no language
function.
function.
3. When playing a CD/WMA/MP3 disc, the AUDIO button is disabled.
During playback of DVD/VCD disc, press the BAND(P/N) button on the front
panel or on the remote control repeatedly to change the VIDEO SIGNAL
SYSTEM mode.
panel or on the remote control repeatedly to change the VIDEO SIGNAL
SYSTEM mode.
5
time of the playing chapter,
the remained time of the playing chapter, the elapsed
the remained time of the playing title,
the remained time of the playing title,
2. When playing a VCD/CD disc , press the OSD button repeatedly on the
remote control to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track, the
elapsted time of the disc, the remained time of the disc.
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track, the
elapsted time of the disc, the remained time of the disc.
3. When playing a MP3/WMA disc, press the OSD button repeatedly on
the remote control to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track.
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track.
.10 Change the Caption Language
.11 Change the Audio Language
5.12 Change the Video Signal System
.13 Look over the Playback Status
1. When playing a DVD disc, press the OSD button repeatedly on the
remote control to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing title, the
serial number of the playing chapter, the elapsed
display the information such as: the serial number of the playing title, the
serial number of the playing chapter, the elapsed
time of the playing title,
etc.
PDF created with FinePrint pdfFactory Pro trial version