Samsung ME18H704SFG/AA Instruccion De Instalación

Descargar
Página de 20
8
Step-by-step installation guide
1. PLACEMENT OF THE MOUNTING PLATE
A.  REMOVING THE 
MICROWAVE OVEN FROM 
THE CARTON/REMOVING 
THE MOUNTING PLATE
1.  Remove the installation instructions, Exhaust 
adaptor, filters, glass tray, and the small 
hardware bag. Do not remove the Styrofoam 
protecting the front of the oven.
2.  Fold back all 4 carton flaps fully against carton 
sides. Then carefully roll the oven and carton 
over onto the top side. The oven should be 
resting in the Styrofoam.
Styrofoam
Carton
Carton
Styrofoam
3.  Pull the carton up and off the oven.
4.  Remove and properly discard plastic bags.
Screws
Screws
Mounting Plate
Screws
Mounting Plate
Screws
5.  Remove the 2 screws from the mounting plate. 
This plate will be used as the rear wall template 
and for mounting.
NOTE: Retain the two screws. You will need to re-
insert the screws in their original locations after you 
have removed the mounting plate.
B.  FINDING THE WALL STUDS
Wall Studs
Center
Center
Wall Studs
1.  Find the studs using one of the following 
methods:
 
A.  With a stud finder – a magnetic device which 
locates nails.
OR
 
B.  Use a hammer to tap lightly across the 
mounting surface until you hear a solid 
sound. This will indicate a stud location.
2.  After locating the stud(s), locate the stud’s 
center by probing the wall with a small nail to 
find the edges of the stud. Then, place a mark 
halfway between the edges. The center of any 
adjacent studs should be 16˝ or 24˝ from this 
mark.
3.  Draw a line down the center of the studs.
THE MICROWAVE MUST BE CONNECTED TO 
AT LEAST ONE WALL STUD.
SMH1927_XAA_DE68-04108A-02_EN_120725.indd   8
5/3/2013   8:45:02 AM