Lorex LHV10162TC8 Manual De Propietario
The Record Info menu shows the start and end times of recordings saved on the hard
drive.
drive.
To access the Record Info menu:
• From the Main Menu, click
and then select Info>Record Info.
15.2.3
Version
The Version sub-menu allows you to view information about the current firmware installed
on the system.
on the system.
To access the Version menu:
• From the Main Menu, click
and then click Info>Version.
15.2.4
Alarm Status
The Alarm Status menu shows you a display of system alarms. Activated alarms are high-
lighted in white. Additional info such as channels that are currently detecting motion is
shown.
lighted in white. Additional info such as channels that are currently detecting motion is
shown.
The following alarms are shown in the Alarm Status menu:
• No HDD: No hard drive is detected.
• Disk Error: Hard drive error detected.
• Disk Full: Hard drive is full.
• Net Disconnection: System is not connected to the network.
• IP Conflict: More than one device on the network is using the same IP address.
• MAC Conflict: More than one device on the network is using the same MAC address.
• Local Alarm: Not supported.
• Net Alarm: Not supported.
• Disk Error: Hard drive error detected.
• Disk Full: Hard drive is full.
• Net Disconnection: System is not connected to the network.
• IP Conflict: More than one device on the network is using the same IP address.
• MAC Conflict: More than one device on the network is using the same MAC address.
• Local Alarm: Not supported.
• Net Alarm: Not supported.
#LX400014; r. 2.0/15899/15899; en-US
47