Bose® Wave SoundTouch Manual De Propietario
English - 19
Connecting Other Equipment
System connections
The rear panel of the Wave
®
SoundTouch™ music system provides connections for external equipment.
5
6
7
8
9
10
2
1
3
4
11
1
Fm 75
Ω ANTENNA
3.5 mm FM antenna connector. See "Using an external antenna" on page 21.
2
Bose link
Input connector for the SoundTouch™ pedestal.
3
AUx IN
3.5 mm stereo input connector for external sources. See "Using the AUX IN connector" on page 20.
4
HEADPHONES
A 3.5 mm stereo headphone connector. See "Using headphones" on page 20.
5
Control button
Places the system in the Power Saving mode (page 26) or initiates an alternate system setup method (page 26).
6
Wi-Fi
®
status indicator:
•
Off – No power to the SoundTouch
TM
pedestal or the network is disabled
•
White (blinking fast) – Attempting to connect to the network
•
White – Connected to the network and active
•
Amber (blinking) – Failed to connect or network error
•
Amber (blinking fast) – Firmware error - Call Bose service
7
Ethernet connector
Used for a wired network connection.
8
SETUP A
A USB Micro-B input used for connecting to a computer for performing system setup.
9
SETUP B
A USB Standard-A input reserved for future use.
10
SERVICE
Used for special service functions. Not for customer use.
11
SoundTouch
™
pedestal Bose link cable
Plugs into the Wave
®
music system Bose link connector. It provides power and control signals to the SoundTouch™ pedestal.