Manualsbrain.com
  1. Manuales
  2. Marcas
  3. GE
  4. PK7500DF
  5. Hoja De Especificaciones

GE PK7500DF Hoja De Especificaciones

Descargar
Página de 2
Listed by 
Underwriters 
Laboratories
Dimensions anD installation information (in inches)
PK7500Df 
Profile
™
 Series 27" Built-In Double Convection Wall Oven
 
Specification Revised 5/15
For answers to your Monogram,
® 
GE Profile
™
 
or GE
®
 appliance questions, visit our website 
at geappliances.com or call GE Answer Center
®
 
service, 800.626.2000.
Most 30" Wall Cabinets Can be used 
With this unit.
note: These ovens are not approved for 
stackable installations. Cabinets installed 
adjacent to wall ovens must have an adhesion 
spec of at least a 194°F temperature rating.
Door handle protrudes 3" from door face. 
Cabinets and drawers on adjacent 45° and 90° 
walls should be placed to avoid interference 
with the handle.
Electric wall ovens are not approved for 
installation with a plug and receptacle.  
They must be hard wired in accordance  
with installation instructions. 
installation inforMation:  
Before installing, consult installation 
instructions packed with product for   
current dimensional data.
Side-by-side installations require at  
least 2" between cutouts.
CK7500
PK7500
JK5500
JK3500
 Cabinet   
27"
  A – Overlap of oven at top of cutout 
1"
  B – Overlap of oven over side of edges of cutout 
1"
  C – Overlap of oven at bottom of cutout 
1"
 Oven 
  D – Install depth                                                                             23-1/2" 
   E –  Overall height with trim 
51-1/8"
  F  – Overall width 
26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
 MAX.
44" to 
bottom of 
junction box
D
F
E
Conduit 
 
  40" 
Junction box 
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor  
13-1/4"  
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
CK7500
PK7500
JK5500
JK3500
 Cabinet   
27"
  A – Overlap of oven at top of cutout 
1"
  B – Overlap of oven over side of edges of cutout 
1"
  C – Overlap of oven at bottom of cutout 
1"
 Oven 
  D – Install depth                                                                             23-1/2" 
   E –  Overall height with trim 
51-1/8"
  F  – Overall width 
26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
 MAX.
44" to 
bottom of 
junction box
D
F
E
Conduit 
 
  40" 
Junction box 
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor  
13-1/4"  
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
CK7500
PK7500
JK5500
JK3500
 Cabinet   
27"
  A – Overlap of oven at top of cutout 
1"
  B – Overlap of oven over side of edges of cutout 
1"
  C – Overlap of oven at bottom of cutout 
1"
 Oven 
  D – Install depth                                                                             23-1/2" 
   E –  Overall height with trim 
51-1/8"
  F  – Overall width 
26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
 MAX.
44" to 
bottom of 
junction box
D
F
E
Conduit 
 
  40" 
Junction box 
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor  
13-1/4"  
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
CK7500
PK7500
JK5500
JK3500
 Cabinet   
27"
  A – Overlap of oven at top of cutout 
1"
  B – Overlap of oven over side of edges of cutout 
1"
  C – Overlap of oven at bottom of cutout 
1"
 Oven 
  D – Install depth                                                                             23-1/2" 
   E –  Overall height with trim 
51-1/8"
  F  – Overall width 
26-3/4"
Cutout depth
23-1/2" MIN
8-3/4"
 MAX.
44" to 
bottom of 
junction box
D
F
E
Conduit 
 
  40" 
Junction box 
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor  
13-1/4"  
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
22"
PK7500
KW rating
240V 7.2
208V 5.4
breaKer size
240V 30 Amps
208V 30 Amps