GPX C253B Manual De Propietario
1. If in radio mode, press and hold
the
Source/Al Off button to turn
the unit off.
2. Press the
Al1 or Al2 button.
3. Press the
Hour button to adjust
the hour.
The PM indicator will light when
the hour is set in the PM.
The PM indicator will light when
the hour is set in the PM.
4. Press the
Min button to adjust
the minute.
The Alarm 1 or Alarm 2 indicator
will come on.
The Alarm 1 or Alarm 2 indicator
will come on.
5. Press the
Al1 or Al2 buttons
repeatedly to switch between
Radio, Buzzer or off.
If the alarm is set to Radio, use
the Vol+/- buttons to adjust the
volume of the alarm.
Radio, Buzzer or off.
If the alarm is set to Radio, use
the Vol+/- buttons to adjust the
volume of the alarm.
6. Once the set alarm time is
reached, the alarm will sound.
To set the other alarm, follow
the above steps and choose the
alarm not currently set.
To set the other alarm, follow
the above steps and choose the
alarm not currently set.
1. Press the
Source/Al Off button
to turn the clock radio on.
2. Press the
Source/Al Off button
again to switch between the AM
and FM radio mode.
and FM radio mode.
3. Press the
Tun+ and Tun-
buttons to adjust the radio to
the desired frequency.
the desired frequency.
4. Press and hold the
Tun+ and
Tun- buttons to search for the
next available frequency.
next available frequency.
5. Press the
Vol+/- buttons to
adjust the volume.
6. Press and hold the
Source/Al
Off to turn the radio off.
Clock and Sleep Timer
Alarm
Radio
1. If in radio mode, press and hold
the
Source/Al Off button to turn
the unit off.
2. Press and hold the
Clock/Mem
button until the display begins
to blink, then release the button.
to blink, then release the button.
3. Press the
Hour button to adjust
the hour.
The PM indicator will light when
the hour is set in the PM.
The PM indicator will light when
the hour is set in the PM.
4. Press the
Min button to adjust
the minute.
5. Press the
Clock/Mem button to
finish setting the time.
Setting the Clock
1. Press the
Snooze/Sleep button
repeatedly to set the sleep timer
( 90, 80, 70, 60, 50, 40, 30, 20,
10 min or OFF ).
( 90, 80, 70, 60, 50, 40, 30, 20,
10 min or OFF ).
2. Once the set sleep time has
expired the clock radio will
automatically power off.
automatically power off.
Setting the Sleep Timer
Setting the Alarm
1. Follow the instructions for
Setting the Alarm.
2. Press the
Al1 or Al2 buttons
repeatedly until the indicator is
no longer lit.
no longer lit.
Cancelling the Alarm
After the alarm sounds:
Press the
Snooze/Sleep button to
delay the alarm for an additional 9
minutes.
minutes.
OR
Press the
Source/Al Off button to
turn the alarm off until the set alarm
time is reached again.
time is reached again.
Snooze and Alarm Reset
Tuning the AM or FM Radio
1. Follow the instructions for
Tuning the AM or FM Radio.
2. Tune to the desired station.
3. Press and hold the
3. Press and hold the
Clock/Mem
button to save the current radio
station as a preset.
station as a preset.
Saving a Station as a Preset
1. Follow the instructions for
Tuning the Radio and Saving a
Station as a Preset.
Station as a Preset.
2. Press the
Clock/Mem button
to cycle through preset radio
stations.
stations.
Tuning to a Preset Radio Station
Adjust the position of the
FM
Antenna to improve FM radio
reception.
reception.
An AM antenna is built into the
clock radio. To improve AM radio
reception, adjust the position of the
clock radio.
clock radio. To improve AM radio
reception, adjust the position of the
clock radio.
Radio Reception
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently
asked questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes,
visite la sección de apoyo en
www.gpx.com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur
www.gpx.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.com
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
Requires a 3.5mm audio cable (not
included).
included).
1. Connect a 3.5mm audio cable
to the
Line Input and the audio
output on an MP3 player or
other audio device.
other audio device.
2. Press the
Source/Al Off to
switch to Line in mode.
The display will show “AU”
3. Use the native controls on the
connected MP3 player or other
audio source to play your audio
through the unit. The volume
buttons on the unit will not
function in line in mode, so it is
necessary to use the controls
on the native device.
When not in use, make sure to
disconnect the 3.5mm audio
cable (not included).
audio source to play your audio
through the unit. The volume
buttons on the unit will not
function in line in mode, so it is
necessary to use the controls
on the native device.
When not in use, make sure to
disconnect the 3.5mm audio
cable (not included).
Line Input
Using the Line Input