KitchenAid KBBR306ESS-SS Guía De Instalación

5. Using the two screws, attach the base grille assembly to the 

refrigerator as shown.

NOTE: Drive in the right side screw first.

Complete Installation

1. Turn the water supply line valve to the “Open” position. 

2. Turn the refrigerator switch to the ON position. See “Power 

On/Off Switch” in the Use & Care Guide for instructions. Wait 
a few minutes. Check the water line connections for leaks. 

3. Remove all boxes, parts packages and packing materials 

from the interior of the refrigerator. See the “Cleaning” section 
in the Use & Care Guide for instructions. Remove the film and 
cardboard from the grille and doors or door frame, depending 
on your model.

4. Install the shelves and bins in the refrigerator and freezer 

compartments.

5. The controls are preset at the factory to the midpoint setting. 

Make sure the compressor is operating properly and that all 
the lights are working.

6. If construction will continue after the refrigerator has been 

installed, set the controls to OFF.

To get the most efficient use from your new built-in refrigerator, 
read the Use & Care Guide. Keep Installation Instructions and 
Use & Care Guide near the built-in refrigerator for easy reference.

A