KitchenAid KSF22C4CYY Manual De Propietario

For crushed ice, cubes are crushed before being dispensed. This 
may cause a slight delay when dispensing crushed ice. Noise 
from the ice crusher is normal, and pieces of ice may vary in size. 
When changing from crushed to cubed, a few ounces of crushed 
ice will be dispensed along with the first cubes.

1. Make sure the desired type of ice is selected.

          

2. Press a sturdy glass against the dispenser lever. Hold the 

glass close to the ice guide to ensure that the ice dispenses 
into the glass.    

IMPORTANT: You do not need to apply a lot of pressure to the 
lever in order to activate the ice dispenser. Pressing hard will 
not make the ice dispense faster or in greater quantities.

3. Remove the glass to stop dispensing.

NOTE: Ice may continue to dispense for several seconds after 
removing the glass from the lever. The dispenser may 
continue to make noise for a few seconds after dispensing.

When you use the dispenser, the light will automatically turn on. 

■

If you want the light to be on continuously, press LIGHT. The 
display screen indicates when the light is set to stay on. 

■

Press LIGHT again to turn the dispenser light off.

The dispenser lights are LEDs that cannot be changed. If it 
appears that your dispenser lights are not working, see “Problem 
Solver” for more information.

The Dispenser Lock 

The dispenser can be turned off for easy cleaning or to avoid 
unintentional dispensing by small children and pets. 
NOTE: The lock feature does not shut off power to the refrigerator, 
to the ice maker, or to the dispenser light. It simply deactivates the 
controls and dispenser lever. To turn off the ice maker, see “Ice 
Maker and Storage Bin.”

■

Press and hold LOCK for 3 seconds to lock the dispenser. 

■

Press and hold LOCK a second time to unlock the dispenser.

The display screen indicates when the dispenser is locked. 

Ice Maker and Storage Bin

■

Allow 24 hours to produce the first batch of ice. Discard the 
first three batches of ice produced.

■

The quality of your ice will be only as good as the quality of the 
water supplied to your ice maker. Avoid connecting the ice 
maker to a softened water supply. Water softener chemicals 
(such as salt) can damage parts of the ice maker and lead to 
poor quality ice. If a softened water supply cannot be avoided, 
make sure the water softener is operating properly and is well 
maintained.

■

Do not use anything sharp to break up the ice in the storage 
bin. This can cause damage to the ice container and the 
dispenser mechanism.

■

Do not store anything on top of or in the ice maker or 
storage bin.

The On/Off switch is located on the top right-hand side of the 
freezer compartment.

■

To turn on the ice maker, slide the control to the ON (left) 
position.

■

To manually turn off the ice maker, slide the control to the 
OFF (right) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker 
sensors will automatically stop ice production, but the control will 
remain in the ON (left) position.

1. Hold the base of the storage bin with both hands and press 

the release button to lift the storage bin up and out.
NOTE: It is not necessary to turn the ice maker control to the 
OFF (right) position when removing the storage bin. The 
sensor cover (“flipper door”) on the left wall of the freezer 
stops the ice maker from producing ice if the door is open or 
the storage bin is removed.

A