Linksys RE2000 Manual De Propietario

 

Linksys Wireless-N Range Extender

After setting up the extender with the setup software (located on the CD), the 

extender will be ready for use. If you would like to change its advanced settings, 

use the extender’s browser-based utility.

Using a wired computer:
1.  Use the included Ethernet (network) cable to connect your extender to 

your computer.

2.  Open a web browser. If you have defined a default startup page in your 

browser, the extender’s User Name and Password dialog box automatically 

opens. If your browser’s home or default page is blank, enter any valid 

web address and the extender’s User Name and Password dialog box 

opens.

3.  Leave the User Name blank, then enter the default password admin.
4.  Click OK. You are logged in to your extender’s browser-based utility.

Using a wireless computer:
1.  Locate the extender’s wireless network name (SSID). The extender comes 

with a pre-configured SSID showing as LinksysExtenderxxxxx in the 

wireless site survey of your computer, with xxxxx being the last five digits 

of your extender’s serial number.

2.  Connect your computer to the extender’s wireless network. Refer to 

your computer’s operating system documentation or online help for 

instructions.

3.  Open a web browser. If you have defined a default startup page in your 

browser, the extender’s User Name and Password dialog box automatically 

opens. If your browser’s home or default page is blank, enter any valid 

web address and the extender’s User Name and Password dialog box 

opens.

4.  Leave the User Name blank, then enter the default password admin.
5.  Click OK. You are logged into your extender’s browser-based utility.