Yamaha YSP-2500 Manual De Propietario

PLAYBACK

➤ Listening to the sound from a Bluetooth device

En

• Perform pairing with the Bluetooth device and unit within 10 m (33 ft) of each 

other.

• Up to eight Bluetooth devices can be pairing with the unit. If a ninth device is 

paired, the oldest pairing information is deleted.

• If pairing information for a device is deleted, to use that device again, pairing of the 

device is required again.

• If a Bluetooth device is already connected to the unit, terminate that Bluetooth 

connection, then perform pairing with the new device.

• Refer to “Bluetooth” (p. 67) in “Troubleshooting” if paring is not possible.

“Bluetooth” is selected as the input.

When a Bluetooth device is properly connected, the 
following is displayed in this unit’s front panel display.

• Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each 

other.

• It may be necessary to select “YSP-2500 Yamaha” in the Bluetooth device list 

again, in the event that a connection problem occurs. You may have to change the 
output setting to output audio to the unit, depending on the Bluetooth device you 
are using.

• Adjust the volume level of the Bluetooth device as required.

• If  a  Bluetooth device is already connected to the unit, terminate that Bluetooth 

connection, then connect with the new device.

• “BLUETOOTH”, or the name of the connected device, is displayed in the front 

panel display. “_” is displayed for non-alphanumeric characters in the device 
name.

Bluetooth connection is terminated in the following cases. When the 
Bluetooth connection is terminated, “Disconnect” is displayed in 
this unit’s front panel display.

BLUETOOTH

Connect