Frigidaire FPRU19F8RF Manual De Usuario

Descargar
Página de 19
18
BEFORE YOU CALL
PROBLEM
CAUSE
CORRECTION
“E7”, “E8”, “E9” 
is displayed  
on control.
•  The control has regis-
tered an error code.
•  For toll-free telephone support in the U.S. 
and Canada: 1-800-374-4432
“Sb” is  displayed 
on control.
•  The control is in  
Sabbath Mode.
•  Pressing the CONTROL LOCK and TEMP 
MODE keys to exit Sabbath Mode.
SOUND AND NOISE
Louder sound 
levels whenever 
appliance is on.
•  Appliance operates at 
higher pressures during 
the start of the ON cycle.
•  This is normal. Sound will level off or dis-
appear as appliance continues to run.
Popping or crack-
ing sound when
compressor 
comes on.
Bubbling or gur-
gling sound.
•  Metal parts undergo ex-
pansion and contraction, 
as in hot water pipes.
•  Refrigerant (used to cool 
refrigerator) is circulating 
throughout the system.
•  This is normal. Sound will level off or dis-
appear as appliance continues to run. 
•  This is normal.
Vibrating or 
rattling noise.
•  Appliance is not level. It 
rocks on the floor when 
it is moved slightly.
•  Floor is uneven or weak. 
 
 
•  Appliance is touching  
the wall.
•  Level the appliance. Refer to  
“Leveling” section. 
•  Ensure floor can adequately support the 
appliance. Level the appliance by putting 
wood or metal shims under part of the 
appliance.
•  Re-level appliance or move appliance  
slightly. Refer to “Leveling” in the IN-
STALLATION section.
WATER / MOISTURE / FROST INSIDE APPLIANCE
Moisture forms 
on inside appli-
ance walls.
•  Weather is hot and humid, 
which increases internal 
rate of frost buildup.
•  Door is slightly open.
•  Door is kept open too long.
•  This is normal. 
 
•  See “DOOR PROBLEMS”.
•  Open the door less often.
ODOR IN APPLIANCE
Odors in 
appliance.
•  Interior needs to be 
cleaned.
•  Foods with strong odors 
are in the appliance.
•  Clean interior with sponge, warm water, 
and baking soda. Replace air filter.
•  Cover the food tightly.
DOOR PROBLEMS
Door will  
not close.
•  Appliance is not level. It  
rocks on the floor when 
it is moved slightly.
•  Floor is uneven or weak.
•  This condition can force the cabinet out 
of square and misalign the door. Refer to 
“Leveling” section.
•  Ensure floor can adequately support appli-
ance. Level the appliance by putting wood 
or metal shims under part of the appliance.
LIGHTING PROBLEMS
Light bulb is 
not on.
•  The light bulb is burned 
out.
•  No electric current is 
reaching the appliance.
•  Control is in Sabbath 
mode (Sb is displayed on 
control).
•  Follow directions under INTERIOR  
LIGHTING section.
•  See “Appliance does not run”. 
•  Depress TEMP MODE key and CONTROL 
LOCK key for 3 seconds.