Frigidaire FFFS5115PW Instruccion De Instalación

Descargar
Página de 36
5
INSTALLATION REQUIREMENTS
MINIMUM INSTALLATION CLEARANCES - Inches (cm)
SIDES
REAR
TOP
FRONT
 Alcove
0” (0 cm) 0” (0 cm)* 0” (0 cm)
n/a
 Under-
 Counter
0” (0 cm) 0” (0 cm)* 0” (0 cm)
n/a
 Closet
0” (0 cm) 0” (0 cm)* 0” (0 cm)
1” (2.5 cm)
0”
(0cm)
0”
(0cm)
1”
(2.5cm)
0”
(0cm)
Installation in a Recess or Closet
If washer and dryer are installed in the same closet, 
door ventilation is required: A minimum of 120 square 
inches (774.2 cm²) of opening, equally divided at the top 
and bottom of the door, is required. Louvered openings 
should be located 3 inches (7.6 cm) from bottom and 
top of door. Air openings are required to be unobstructed 
when a door is installed. A louvered door with equivalent 
air openings for the full length of the door is acceptable.
60 sq. in.
(387.1cm²)
3”
(7.6cm)
60 sq. in.
(387.1cm²)
3”
(7.6cm)
closet door
Clearance requirements
IMPORTANT
DO NOT INSTALL YOUR WASHER:
1  In an area exposed to dripping water or outside 
weather conditions. The ambient temperature 
should never be below 60° F (15.6° C) to 
maximize detergent effectiveness.
2  In an area (garage or garage-type building) 
where gasoline or other fl ammables (including 
automobiles) are kept or stored.
3  On carpet. Floor MUST be solid with a maximum 
slope of 1 inch (2.5 cm). To minimize vibration 
or movement, reinforcement of the fl oor may be 
necessary.