Danby Silhouette Professional 5.5 Cu. Ft. Built-In Refrigerator - Black Cabinet with Stainless Steel Door Manual Del Producto

1) The refrigerator does

not operate.

2) The refrigerator is not

cold enough.

3) Turns on and off

frequently.

4) The light does not

work.

5) Vibrations.

6) The refrigerator seems

to make too much

noise.

• Not plugged in

• The appliance is turned off

• The circuit breaker tripped or fuse has

been blown.

• Check the temperature control setting

• External environment may require a

higher setting.

• The door is opened too often

• The door is not closed completely

• The door gasket does not seal properly

• The room temperature is hotter

than normal.

• A large amount of beverage has

been added to the refrigerator.

• The door is opened too often

• The door is not closed completely

• The temperature control is not set

correctly

• The door gasket does not seal properly

• Not plugged in

• The circuit breaker tripped or a

blown fuse

• The light button is “OFF”

• Ensure that the refrigerator is level.

• The rattling noise may come from

the flow of the refrigerant, which is

normal. As each cycle ends, you

may hear gurgling sounds caused by

the flow of refrigerant in your

refrigerator.

• Contraction and expansion of the

inside walls may cause popping and

crackling noises.

• The refrigerator is not level

• Plug in the unit.

• Press the ON button.

• Reset circuit breaker;

check fuses.

• Adjust setting as needed.

• Limit open door duration.

• Close door securely.

• Ensure the gasket is clean.

• This is normal.

• Limit amount of warm

beverage introduced at one time.

• Limit amout of door openings.

• Close door securely.

• Adjust setting as needed.

• Ensure the gasket is clean.

• Plug in the unit.

• Reset circuit breaker;

check fuses.

• Switch light button to “ON”.

• Level the refrigerator. (page 2)

• This is normal.

• Level the refrigerator.

TROUBLESHOOTING

SOLUTIONS

POSSIBLE CAUSE

PROBLEM

Occasionally, a problem is minor and a service call may not be necessary- use this troubleshooting guide for a possible
solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number
1-844-455-6097 for assistance.