Bunn LCA-2 IC Manual De Usuario

OPERATING CONTROLS AND INTERFACE

1. Dispense Switches: Pull and Hold to dispense product.

2. Stop Switch: Momentary switch stops all dispense functions.

3. Alternate Portion Control Switch: Momentarily pushed to select the Alternate Portion Control Volume.

4. Function Selector Switch: Allows the user to set the dispenser into different dispensing modes.

a. Rinse: Dispenses water only- Flushes the mix chamber and dispense tip.

b. Prime: Dispenses concentrates only – Primes the concentrate pump.

c. Normal: Normal dispense mode - Dispenses mixed product (concentrate and water).

5. Mode Selector Switch: Allows the user to set the dispenser into different operating modes.

a. Run: Normal operating position.

b. Off: Turns off all functions.

WARNING - The OFF Mode does not remove AC power from the dispenser. Disconnect power source before

servicing the dispenser

c. Night: Anti-pilfering mode that disables dispensing.

6. Door Interlock Switch: Unit will not dispense product if the door is open.

7. Power LED: Red - illuminates when AC power is applied to dispenser.

8. Portion LED: Yellow - illuminates when the portion dispense option has been selected, (5 second delay).

9. Rinse LED: Yellow - illuminates when the optional preset rinse alarm time has elapsed.

10. Left Refill LED: Yellow - illuminates when the Left Concentrate BIB needs replaced.

11. Right Refill LED: Yellow - illuminates when the Right Concentrate BIB needs replaced.

12. Programming Keypad: Used in conjunction with the LCD display to program and calibrate the dispenser to

customer specific requirements. (Located behind the splash guard panel)

13. LCD Display: Displays programming menus and fault messages. (Located behind the splash guard panel)

BUNN ICED COFFEE

AMBIENT UNIT

4 5

38059 082405