AEG 33620 DK-M Manual De Usuario

30

20 min

a

Removable

panel

Proper arrangements must be taken in

designing the furniture unit, in order to

avoid any contact with the bottom of the

hob which can be heated when it is

operated.
The recommended solution is shown in

diagram.
The panel fitted under the hob should be

easily removable to allow easy access if

technical assistance is needed.

50

Before fitting the hob into the cut out, the sealing gasket supplied with the

hob must be fitted to the edge of the cut out. It is essential that no gaps are

left in this seal in order to prevent spillage near the hob seeping into the

cabinet below.

1) Place the sealing gasket (A)

all around the edge of

the cut out.

2) Fit the hob in the cut out

    and push it down until

    it comes in contact with

    the kitchen top surface.

   The remove the excess

   sealing.

3) To remove the hob from

    the cut-out, lift the edge

    of the hob by means of

    the edge of a screw-

    driver.