Cisco Systems OL-16447-01 Manual De Usuario
2-14
Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide
OL-16447-01
Chapter 2 Switch Installation
Installing the Switch
After the switch is mounted in the rack, you need to do these tasks to complete the installation:
•
Power on the switch. See the
•
Connect to the RJ-45 connector of a dual-purpose port, and run the initial configuration dialog.
See the Cisco ME 3400E Ethernet Access Switch Getting Started Guide for instructions.
•
Connect to the front-panel ports. See the
, the
to complete the installation.
•
We recommend attaching the cable guide to prevent the cables from obscuring the front panel of the
switch and the other devices installed in the rack. Use the supplied black screw shown in
switch and the other devices installed in the rack. Use the supplied black screw shown in
to attach the cable guide to the left or right bracket.
Wall-Mounting
•
•
Note
Wall-mounting has not been evaluated for NEBS applications.
Attaching Brackets for Wall-Mounting
Figure 2-11
Attaching 19-inch Bracket to Wall-Mount Cisco ME 3400EG-12CS-M or
Cisco ME 3400E-24TS-M
Follow the same steps to attach the second bracket to the opposite side.
1
Phillips truss-head screws
280842
1