Viewsonic PJ510 Manual De Usuario

You can use the elevator feet to make adjustments if the surface on which you need to set the 

projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range 

of the elevator feet is 0 to 9 degrees.

Press and hold in the elevator buttons.

Raise or lower the projector to the desired height and 
then release the elevator buttons. When you release the 
elevator buttons, the elevator feet will lock position.

As necessary, you can also adjust the height of the projector 
by twisting the elevator feet by hand.

 

If you press the elevator buttons without holding the projector, the projector might crash down, 

overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector 

and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to 

adjust the elevator feet.

Elevator buttons

Elevator feet