Viewsonic PJ510 Manual De Usuario

• The remote control works with the projector’s remote sensor.
• The range of the remote sensor is 3 meters with a 60-degree 

range (30 degrees to the left and right of the remote sensor). 

Also a remote signal reflected in the screen etc. may be 

available. If it is difficult to send a remote signal to the sensor 

directly, please try.

• Since the remote control uses infrared light to send signals to 

the projector (Class1 LED), be sure to use the remote control in 

an area free from obstacles that could block the remote 

control’s output signal to the projector.

 

• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in 

malfunction.

• Remove the batteries from the remote control and store them in a safe place if you won’t be 

using the remote control for an extended period.

• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights, such as direct sunlight or light from an extremely close range (such as from 

an inverter fluorescent lamp), hit the projector’s remote sensor, the remote control may cause to 

function. Adjust the direction of the projector to keep light from directly hitting the projector’s 

remote sensor.

Remote sensor

approximately 3 

meters