Viewsonic PJ510 Manual De Usuario

The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to 

clean the air filter, clean the air filter as soon as possible. If the air filter becomes clogged by dust or 

the like, internal temperature rises and could cause malfunction.

Turn off the projector, and unplug the power cord.

Apply a vacuum cleaner to the top of the filter cover to clean 
the air filter.

Reset the filter timer, according to following “Reset The 
Filter Timer”.

(1)  Turn on the projector. While the projector running, press the MENU button to open the menu.
(2)  Choose the “OPTION” on the menu using the (S)/(T) button, then press the (X) button or 

ENTER button.

(3) Choose the “FILTER TIME” using the (S)/(T) button, then press and hold the (X) button of 

projector or the RESET button of remote control for 3 seconds.

(4)  Choose the “RESET” using the (S) button.

 

• Please carefully read the “PJ510 QUICK START GUIDE”.
• Before replacing the air filter, make sure the power switch is off and the power cable is not 

plugged in.

• Use the air filter of the specified type only. (sold separately)
• Do not use the projector with the air filter and filter cover removed. The use without the air 

filter could result in damage.

 

• Do not reset the filter timer without cleaning or replacing the air filter.
• If the air filter becomes clogged by dust or the like, internal temperature rises and could cause 

malfunction. The power is automatically turned off in order to prevent the projector from 

overheating internally.

• When you replace the lamp, please replace also the air filter. The air filter may be attached when 

you buy a replacement lamp for this projector. Please ask your dealer.

Filter cover