Nortel Networks 400 4.0 Manual De Usuario
316
Chapter 24 Replacing data cards and processing hardware
N0060612
N0060612
The BCM system is equipped with 256 MB of random access memory (RAM). The memory
resides on a dual in-line memory module (DIMM) on the main card. The main card contains space
to add a second DIMM, or you can upgrade the existing DIMM.
resides on a dual in-line memory module (DIMM) on the main card. The main card contains space
to add a second DIMM, or you can upgrade the existing DIMM.
provides an overview of the process for replacing or adding memory chips.
Figure 172 Memory replacement overview
Increasing the amount of memory
To increase the amount of memory in the system, you can:
•
add another DIMM to the second DIMM slot.
•
replace current DIMM with a DIMM that contains more RAM.
Removing the dual in-line memory module (DIMM) card
Use this procedure to remove a DIMM when the circuit fails or when you want to increase the
amount of RAM in the BCM main unit.
amount of RAM in the BCM main unit.
Danger: Risk of shock
Disconnect the power cord, telephone cables, and network cables before opening the
computer. Read and follow installation instructions carefully.
Disconnect the power cord, telephone cables, and network cables before opening the
computer. Read and follow installation instructions carefully.
Caution: Use only a Nortel-approved replacement. Contact your account representative
for the current list of approved replacement parts.
for the current list of approved replacement parts.
Note: There must be at least one DIMM installed in the BCM main unit for the system to
function.
function.
Do a software
shutdown
shutdown
Set up unit for
maintenance
maintenance
Remove the base
function tray
function tray
Restore unit to
operation
operation
Pull DIMM off
motherboard
motherboard
Install a new DIMM
Test system