Kohler Thermostatic Electric Shower Manual De Usuario

8

Installation Requirements

. Plumbing

 

Minimum maintained inlet pressure 70 kPa (0.7 bar).

 

00 kPa (.0 bar) recommended for satisfactory operation. 

 

Maximum static inlet pressure 1000 kPa (10 bar).

 

Minimum static pressure 0 kPa (0. bar) to keep the inlet valve closed.

  

. Electrical

 

The Mira Azora 9.8 kW requires a 45 Amp fuse.

 

The terminal block will accept cable up to 6 mm

 

.

3. Standards and Approvals

 

The Mira Azora complies with all relevant directives for CE marking.

. Plumbing

Specifications

 

The appliance is designed to operate with a minimum maintained inlet

 

pressure of 0.7 bar up to a maximum static inlet pressure of 10 bar.

 

When installed in very hard water areas (above 00 ppm temporary

 

hardness) your installer may advise the installation of a water treatment

 

device, to reduce the effects of limescale formation. Your local water

 

company will be able to advise the hardness of water in your area.

 

It is recommended that a non-restrictive (free flowing) isolating valve

 

is fitted in the cold water supply pipe to allow the complete maintenance

 

of the appliance. Do not use a valve with a loose washer plate (jumper)

 

as this can lead to a build up of static pressures.

 

The appliance is suitable for installation within the shower area. It is fitted

 

with a pressure relief device and must be positioned over a water

 

catchment area with the controls at a convenient height for all users.

 

The appliance must be fitted on to a finished flat and even wall surface

 

(this wall surface should be tiled or waterproofed).  

 fit the

 

appliance to the wall and tile up to the case.  For safety requirements, an

 

air gap must be left behind the appliance.