Cooper Lighting IMI-575 Manual De Usuario

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.

IMPORTANT: Read carefully before installing fixture. Retain for future reference.

TM

1.

Loosen and remove ring retaining screws globe retaining 
ring and globe. Components are not tethered.
See Figure 5.

Remove two screws on ballast cover followed by ballast 
cover. See Figure 6.

Unplug optic quick-disconnect.

Unplug service quick-disconnect.

Loosen the two screws holding the power pack to the 
fixture housing. See Figure 7.

Holding the power pack by the handle, rotate the power 
pack until free and lower.

Holding replacement power pack by handle, raise onto 
screw heads and rotate.

Tighten the two screws while holding power pack in 
position.

Plug together the service quick-disconnect.

Plug together the optic quick-disconnect.

Resecure the ballast cover with the two screws.

Reinstall ring retaining screws securing globe retaining ring 
and globe. In the case of type 3 refractive glass globe, use 
the mark on globe bottom for orientation.