Epson MovieMate 30s Manual De Usuario

Doing More with MovieMate

3. Press 

 or 

 to increase or decrease the setting.

The settings are saved, even after you turn MovieMate off. 

You can use the 

Visual Info

. button on the remote control to view the number of hours the 

lamp has been used, and to reset the timer after you install a new lamp. You can also adjust 
the video signal setting and select high altitude mode if necessary.

1. Press the 

 button on the remote control. You see the following on the screen:

Note: If the lamp has been used less than 11 hours, 0H is displayed.

2. Continue pressing the 

 button until you see the item you want to set. 

You can adjust the following items:

■ Video Signal: 

If you are using external video equipment and you see interference or 

other problems, select the appropriate signal for your equipment. For most purposes, 
leave this setting on

 Auto.

■ High Altitude Mode:

 If you are using MovieMate at an altitude above 4,900 feet 

(1500 meters), select

 ON.

■ Lamp-Hours Reset: 

After you replace the lamp, select 

Yes 

to reset the lamp timer.

3. Press 

 or 

 to change the setting.

4. Press the 

 button to save your settings and exit.

For the best image quality, MovieMate uses progressive video display mode. You can change 
to interlaced mode if the picture appears jittery, for example, when you use certain external 
equipment.

To change from progressive to interlaced display mode, press 

.