Yamaha MS101 III Manual De Usuario

(5)-4

  

ENGLISH

* Please keep this manual in a safe place for future reference.

• Only use the voltage specified as correct for the device. The required voltage 

is printed on the name plate of the device.

• Use only the included power cord. 

• Do not place the power cord near heat sources such as heaters or radiators, 

and do not excessively bend or otherwise damage the cord, place heavy 
objects on it, or place it in a position where anyone could walk on, trip over, 
or roll anything over it.

• Be sure to connect to an appropriate outlet with a protective grounding 

connection. Improper grounding can result in electrical shock.

• Do not open the device or attempt to disassemble the internal parts or 

modify them in any way. The device contains no user-serviceable parts. If it 
should appear to be malfunctioning, discontinue use immediately and have it 
inspected by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet 

conditions, or place containers on it containing liquids which might spill into 
any openings.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden 

loss of sound during use of the device, or if any unusual smells or smoke 
should appear to be caused by it, immediately turn off the power switch, 
disconnect the electric plug from the outlet, and have the device inspected 
by qualified Yamaha service personnel.

• If this device should be dropped or damaged, immediately tur n off the power 

switch, disconnect the electric plug from the outlet, and have the device 
inspected by qualified Yamaha service personnel.

• Remove the electric plug from the outlet when the device is not to be used 

for extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold 

the plug itself and not the cord. Pulling by the cord can damage it.

• Before moving the device, remove all connected cables.
• When setting up the device, make sure that the AC outlet you are using is 

easily accessible. If some trouble or malfunction occurs, immediately turn off 
the power switch and disconnect the plug from the outlet.

• Do not use the device in a confined, poorly-ventilated location. Make sure 

that there is adequate space between the device and surrounding walls or 
other devices: at least 10 cm at the sides, 10 cm behind and 20 cm above. 
Inadequate ventilation can result in overheating, possibly causing damage to 
the device(s), or even fire.

• Do not expose the device to excessive dust or vibrations, or extreme cold or 

heat (such as in direct sunlight, near a heater, or in a car during the day) to 
prevent the possibility of panel disfiguration or damage to the internal 
components.

• Do not place the device in an unstable position where it might accidentally 

fall over.

• Before connecting the device to other devices, turn off the power for all 

devices. Before turning the power on or off for all devices, set all volume 
levels to minimum.