Pelco C1977M-D Manual De Usuario
Pelco Manual C1977M-D (6/02)
[ 39 ]
Table C. Video Settings (continued)
Input source
camera
T
To facilitate the connection of video tape
recorders as video sources, the input can
be switched from the default camera po-
sition to VCR. VCRs require a less rigid
setting of the internal PLL, due to jitter
caused by the mechanical components.
recorders as video sources, the input can
be switched from the default camera po-
sition to VCR. VCRs require a less rigid
setting of the internal PLL, due to jitter
caused by the mechanical components.
Output
PAL
R
The video standard to be used at the
standard
output of receivers can be selected to
be PAL or NTSC compatible. Transmit-
ters automatically adapt to the standard
of the connected video source.
be PAL or NTSC compatible. Transmit-
ters automatically adapt to the standard
of the connected video source.
Enable JPEG
low quality
T
This field must be enabled (activated)
images
for the system to take a snapshot of the
camera view. Choose either “high qual-
ity” or “low quality” to enable. The next
five fields are all settings to control this
snapshot.
camera view. Choose either “high qual-
ity” or “low quality” to enable. The next
five fields are all settings to control this
snapshot.
Time slice
0
T
Enter the number of seconds that a new
JPEG should be displayed.
JPEG should be displayed.
FTP server IP
0.0.0.0
T
Enter the address used to connect to the
address
FTP server.
Login name
n/a
T
Enter the login name used to access the
FTP server.
FTP server.
Password
n/a
T
Enter the password for the login name.
Path
n/a
T
Enter the directory to start in, once
connected to the FTP server.
connected to the FTP server.