Panasonic KX-TG5230 Manual De Usuario

To set the ringer volume to high (preset), medium, or low, press [d] or [B].

• To increase volume, press [B]. To decrease volume, press [d].
• To stop ringing, press [0].

To turn the ringer off, press and hold [d] until 2 beeps sound.

To turn the ringer on, press [d] or [B].

• The base unit will ring at the low level.
• You can adjust the ringer volume while an outside call is ringing. 

Press [d] or [B] while the base unit is ringing. 
To turn the ringer off, press and hold [d] until 2 beeps sound.

You can set the handset and base unit ringers to use one of 7 ringer patterns for 
outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” 
are melody patterns. The factory preset is “Tone 1”. 
• You cannot change the ringer tone for intercom calls.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your 

telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 
1 to 3). If you select a melody pattern, you will not be able to distinguish lines by 
their ringers.

• If you select one of the melody ringer patterns, the ringer will continue to sound for 

several seconds if:
— the caller hangs up before you answer the call, or
— another person answers the call using another phone connected on the same line.

Press [MENU].

Press the soft key (

) at “Ringer 

setting”.

Scroll to “Ringer tone” by pressing [d] or 

[B], then press the soft key (

).

Select the desired ringer tone by pressing 
[d] or [B].

• The handset will ring and the ringer tone will 

change. If the ringer volume has been turned off, 
the handset will not ring (p. 18).

• You can also select the ringer tone by pressing 

[1] to [7].

Press the soft key (

), then press [OFF].

Ringer setting

Ringer tone

Ringer tone

1:Tone 1

TG5230.fm  Page 19  Wednesday, February 4, 2004  9:51 AM