ZyXEL Communications VMG5313-B10A/ VMG5313-B30A Manual De Usuario
Chapter 7 Wireless
VMG5313-B10A/-B30A Series User’s Guide
110
7.2.1 No Security
Select No Security to allow wireless stations to communicate with the access points without any
data encryption or authentication.
data encryption or authentication.
Control
Sideband
Sideband
This is available for some regions when you select a specific channel and set the Bandwidth
field to 40MHz. Set whether the control channel (set in the Channel field) should be in the
Lower or Upper range of channel bands.
field to 40MHz. Set whether the control channel (set in the Channel field) should be in the
Lower or Upper range of channel bands.
Passphrase
Type
Type
If you set security for the wireless LAN and have the VMG generate a password, the setting
in this field determines how the VMG generates the password.
in this field determines how the VMG generates the password.
Select None to set the VMG’s password generation to not be based on a passphrase.
Select Fixed to use a 16 character passphrase for generating a password.
Select Variable to use a 16 to 63 character passphrase for generating a password.
Passphrase Key For a fixed type passphrase enter 16 alphanumeric characters (0-9, A-Z, with no spaces). It
must contain both letters and numbers and is case-sensitive.
For a variable type passphrase enter 16 to 63 alphanumeric characters (0-9, A-Z, with no
spaces). It must contain both letters and numbers and is case-sensitive.
spaces). It must contain both letters and numbers and is case-sensitive.
Wireless Network Settings
Wireless
Network Name
(SSID)
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Max clients
Specify the maximum number of clients that can connect to this network at the same time.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
obtain the SSID through scanning using a site survey tool.
Enhanced
Multicast
Forwarding
Multicast
Forwarding
Select this check box to allow the VMG to convert wireless multicast traffic into wireless
unicast traffic.
unicast traffic.
Maximum
Upstream
Bandwidth
Upstream
Bandwidth
Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in
kilobits per second (Kbps).
kilobits per second (Kbps).
Maximum
Downstream
Bandwidth
Downstream
Bandwidth
Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in
kilobits per second (Kbps).
kilobits per second (Kbps).
BSSID
This shows the MAC address of the wireless interface on the VMG when wireless LAN is
enabled.
enabled.
Security Level
Security Mode
Select Basic (WEP, 802.1X) or More Secure (WPA(2)-PSK) to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the VMG. When you select to use a security, additional
options appears in this screen.
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the VMG. When you select to use a security, additional
options appears in this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
encryption or authentication.
See the following sections for more details about this field.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to restore your previously saved settings.
Table 16
Network Setting > Wireless > General (continued)
LABEL
DESCRIPTION