Century 44339 Manual De Usuario

belt must be routed through 

opening in car seat for 

mode.

(see page 22, fig. h )

Belt must lay flat and not be twisted. 

Adjust car seat to recline position (see pages 18 
and 19, fig. c) and place 

on vehicle 

seat equipped with 

anchors.

For ease of installation, extend 

belt

to its maximum length.

Hook connectors to vehicle lower anchors 
(fig. a). Pull connectors to be sure they are 
securely attached anchor points. (fig. b).

Press down firmly in center of car seat to 
compress vehicle seat cushion while tightening 

belt by pulling adjustment belt (fig. c).

Pull front to back and left to right to check for 
secure installation (fig. d). 

Check that the lower anchorage belt stays
tight and does not slip from the tightened 
position. If it does not stay tight, try another 
seating position or contact Customer Service 
(see back cover).

Check level indicator on car seat. Vehicle must
be on level ground and child in car seat when 
checking level indicator.

Ball MUST be entirely in green zone (fig. e). If 
necessary, place rolled towels under car seat, at 
vehicle seat crease, until entire ball is in green 
zone. Then re-check level indicator.

DO NOT use tether 

. Tether must

be stored (see “Tether Storage” page 31).

Periodically check that car seat is securely 
installed and properly leveled; adjust if 
necessary.