Britax BB0-702-00 Folleto

 - The child seat 

MUST

 only be used with a lap and diagonal 

seat belt (approved to UN/ECE regulation no. 16 or equivalent standards).

Place the child seat forward facing in your car.

Feed the diagonal section of the seat belt through the dark red upper belt 
guide on the 

side to the buckle 

(dia 6i).

Fasten the seat belt across your child 

. The lap section should rest on 

the red lap belt guides on each side of the child seat. Make sure the seat belt 
is not twisted and remove any slack.

 - The lap section of the seat belt should rest as forward and as 

low as possible over your child’s pelvis.

 - Check the position of the seat belt buckle, ensure that it is not 

being pulled around the child seat on to the red lap belt guide 

.

Check the position of your vehicle’s upper seat belt anchorage point 

.

If this anchorage point is in front of the child seat it should not be used, try 
another seating position in the car.

Britax_2h.indb   17

30/10/2007   16:24:26